BlueMuse

• Windows app to stream data from Muse EEG headsets via LSL (Lab Streaming Layer).

Features

• Auto detects Muse headsets and provides a visual interface to manage streams.
• Supports Muse 2016, Muse 2, Muse S, and Smith Lowdown Focus glasses (device models are auto detected).
• Supports EEG, PPG, accelerometer, gyroscope, and telemetry data. Note: PPG is only available on Muse 2 and Muse S.
• Can stream from multiple Muses simultaneously (see notes).
• Choose between timestamp formats - LSL "local clock" or Unix Epoch.
• LSL streams in 64-bit or 32-bit.
• Shows latest timestamp received and the current sample rate for each stream.
• Protocol control from Command Line / PowerShell.

Screenshots

Command Line Interface

All commands will launch BlueMuse if it isn't already open.

Basic Operations

Start BlueMuse:

start bluemuse:

Refresh Bluetooth list (used only while running):

start bluemuse://refresh

Close the program:

start bluemuse://shutdown

Streaming

Start streaming first connected (online) Muse:

start bluemuse://start?streamfirst=true

Start streaming specific Muse(s) - by MAC address or device name:

start bluemuse://start?addresses={MAC1 or Name1},{MAC2 or Name2},{MAC3 or Name3}....

Start streaming all Muses:

start bluemuse://start?startall

Stop streaming specific Muse(s) - by MAC address or device name:

start bluemuse://stop?addresses={MAC1 or Name1},{MAC2 or Name2},{MAC3 or Name3},....

Stop streaming all Muses:

start bluemuse://stop?stopall

"startall" can be used at launch (e.g. start bluemuse://start?startall) or while BlueMuse is already running - it will automatically apply to any Muse discovered/connected after the command is received. "stopall" is intended for use only while BlueMuse is already running.

Settings

Change primary timestamp format:

 start bluemuse://setting?key=primary_timestamp_format!value=<BLUEMUSE|LSL_LOCAL_CLOCK_BLUEMUSE|LSL_LOCAL_CLOCK_NATIVE>

Change secondary timestamp format:

 start bluemuse://setting?key=secondary_timestamp_format!value=<BLUEMUSE|LSL_LOCAL_CLOCK_BLUEMUSE|LSL_LOCAL_CLOCK_NATIVE|NONE>

Change channel data type:

 start bluemuse://setting?key=channel_data_type!value=<float32|double64>

Enable / disable EEG data (applies when opening streams):

 start bluemuse://setting?key=eeg_enabled!value=<true|false>

Enable / disable accelerometer data (applies when opening streams):

 start bluemuse://setting?key=accelerometer_enabled!value=<true|false>

Enable / disable gyroscope data (applies when opening streams):

 start bluemuse://setting?key=gyroscope_enabled!value=<true|false>

Enable / disable PPG data (applies when opening streams):

 start bluemuse://setting?key=ppg_enabled!value=<true|false>

Enable / disable telemetry data (applies when opening streams):

 start bluemuse://setting?key=telemetry_enabled!value=<true|false>

Toggle "always pair":

 start bluemuse://setting?key=always_pair!value=<true|false>

Installation

NOTE: As of version 2.5.0.0 (the .NET 10 / WinUI 3 modernization), BlueMuse is now a single self-contained MSIX-packaged application (the separate "LSL Bridge" Win32 process used in 2.4.0.0 and earlier has been merged directly into the main app - see the Architecture note below). The distribution method (Microsoft Store vs. sideload) is still being finalized - this section will be updated once that is confirmed. In the meantime, sideloading as described below will continue to work.

Requires Windows 10 version 1809 (10.0.17763.0) or later, or Windows 11. Built/targeted against the Windows 11 24H2 SDK (10.0.26100.0).

Sideload Install (Current Method)

Each release contains two separate architecture-specific artifacts (x64 and x86) - download the one matching your machine (x64 for most modern PCs) and unzip it. The unzipped folder is a self-contained, Visual-Studio-generated sideload package (e.g. BlueMuse.App_2.5.0.0_x64) containing the .msix, the signing .cer, a Dependencies folder (with the required Microsoft.WindowsAppRuntime.2.msix per CPU architecture), and PowerShell installer scripts.

Auto Install (Recommended)

1. Download the latest release matching your architecture and unzip it.
2. Right-click InstallBlueMuse.ps1 and choose Run with PowerShell (this removes any previously installed BlueMuse package first, then runs Install.ps1). Alternatively, run Install.ps1 or Add-AppDevPackage.ps1 directly if you don't need the old version removed automatically.
3. Follow the prompts - the script installs the certificate (to Local Machine -> Trusted Root Certification Authorities), the Microsoft.WindowsAppRuntime.2 dependency package, and the BlueMuse .msix itself.
4. If PowerShell blocks the script from running, or Windows blocks the install because "Developer Mode" or sideloading isn't enabled, see the PowerShell Installation Guide for detailed steps (temporarily bypassing execution policy, unblocking the script, and enabling Developer Mode via Settings -> Update & Security -> For Developers).

Manual Install

1. Double-click the .cer certificate file and install it to the Local Machine -> Trusted Root Certification Authorities store (you'll need administrator rights for this step).
2. Open the Dependencies\<arch> folder and double-click Microsoft.WindowsAppRuntime.2.msix to install it.
3. Double-click the .msix package in the folder root to install BlueMuse.

Note: releases prior to 2.5.0.0 (2.4.0.0 and earlier) shipped as a UWP app paired with a separate "LSL Bridge" Win32 process and .NET Native runtime dependencies (.appxbundle + Microsoft.NET.Native.Framework/.Runtime packages instead of .msix + Microsoft.WindowsAppRuntime.2), and required Windows 10 1703 or later. The same Auto/Manual install steps above apply structurally, just with those older package names - see the releases page if you need to install one of those versions.

Troubleshooting

If you run into issues with Developer Mode or PowerShell execution policy during installation, see the PowerShell Installation Guide for detailed solutions.

Microsoft Store (Possible In Future)

A Microsoft Store listing is being evaluated for a future release, which would remove the need for manual certificate/sideload steps entirely. This section will be updated if a store link becomes available.

Versions

Latest

• 2.5.0.0 (stable)
  • Modernized to .NET 10 / WinUI 3, converted to SDK-style project.
  • Merged the separate "LSL Bridge" Win32 process directly into the main app (single-process architecture, see Architecture).
  • UI refresh: settings moved to a slide-out side panel, improved main list layout, compact per-stream info display with latest sample values and a one-click copy button.
  • Added Esc key support to collapse/deselect the currently selected Muse in the list.
  • Fixed intermittent Bluetooth/GATT communication issues (JSON parsing errors, spurious device removal, and connection churn) via reentrancy guards and per-device GATT serialization.
  • Window size is now persisted between launches, and the window/taskbar title correctly shows "BlueMuse".
• 2.4.0.0 (stable)
  • Misc package updates.
    • Support Windows 11.
    • Last release built on UWP before the .NET 10 / WinUI 3 modernization (see 2.5.0.0 above).

See CHANGELOG.md for the full version history.

Notes

• Requires Windows 10 version 1809 (10.0.17763.0) or later, or Windows 11. Built/targeted against the Windows 11 24H2 SDK (10.0.26100.0).
• Streaming multiple Muses simultaneously - maintaining consistent data rates for multiple devices may be difficult on some machines, depending on Bluetooth and compute hardware.
• Uses both 32-bit and 64-bit LSL binaries (liblsl32.dll / liblsl64.dll), selected automatically at runtime based on process architecture. Acquired from: ftp://sccn.ucsd.edu/pub/software/LSL/SDK/liblsl-All-Languages-1.11.zip
• liblsl32.dll and liblsl64.dll are dependent on MSVCP90.dll and MSVCR90.dll, both of which I included in the project since these may not be available in the System32 folder on your machine (they weren't on mine).
• The full dependencies of liblsl32.dll are: KERNEL32.dll, WINMM.dll, MSVCP90.dll, WS2_32.dll, MSWSOCK.dll, and MSVCR90.dll. Generated with dumpbin utility.

Architecture

BlueMuse previously ran the LSL streaming logic in a separate "LSL Bridge" Win32 process, because UWP apps ran in a network-isolated sandbox that prevented LSL streams from being visible on the local network. As of the .NET 10 / WinUI 3 modernization, BlueMuse runs as a single unpackaged-network-capable desktop app, and the LSL streaming logic (LSLStreamManager) now runs in-process - there is no longer a separate bridge executable, and no firewall exception is required for a second process.

Timestamp Formats:

• BlueMuse High Accuracy (Unix Epoch Seconds UTC-0)
  • Recommended as primary timestamp if you don't have to time sync with other LSL streams.
  • Generates timestamps that you can use to determine date and very accurate time.
  • Settings value = BLUEMUSE.
• BlueMuse LSL Local Clock (System Uptime Seconds)
  • Recommended if syncing with other LSL streams.
  • Called exactly when packet comes in from Muse.
  • Generates timestamp by calling an equivalent function to LSL local_clock but utilizes the C++ Standard Library instead of the underlying Boost library call used by the LSL .dll.
  • Should produce the exact same value as LSL native local clock with less jitter.
  • Settings value = LSL_LOCAL_CLOCK_BLUEMUSE.
• Native LSL Local Clock - Via Bridge (System Uptime Seconds)
  • Generates timestamp by calling local_clock function from LSL .dll function directly on bridge.
  • May produce jitter.
  • Settings value = LSL_LOCAL_CLOCK_NATIVE.
• None
  • Don't send secondary timestamp.
  • Settings value = NONE.

Troubleshooting

If your Muse is not showing up after searching for awhile:

1. Ensure Muse is removed from "Bluetooth & other devices" list in control panel.
2. Reset Muse - hold down power button until device turns off then back on.
3. Make sure Muse is within reasonable range of your computer. Some built in Bluetooth antennas are not very powerful.

Logs:

BlueMuse writes a log file for various events and exceptions, which may help in troubleshooting issues. The file can be found within AppData:

C:\Users\{Username}\AppData\Local\Packages\{PackageFamilyName}\LocalState\Logs\BlueMuse-Log-{Timestamp}.log

You can also open the log folder directly from the app via Settings -> Open Log Folder.